New Posts  All Forums:Forum Nav:

Blank screen

post #1 of 9
2/3/10 at 2:50pm
Thread Starter 
I have a Winbook V330 and the screen is blank. Before if I tapped the base of the screen the information would display. Now tapping the base of the screen doesn't work, nothing shows on the screen. The backlite works, I can increase/decrease the brightness. Plugging into a external monitors shows the information.
Is it the inverter or the screen that has to be replaced. If its the screen where can I get another one. I've done a search and can't locate any replacement for the V330. There are that has the screen for the V300.
Any information would be greatly appreciated.
Reply
Reply
post #2 of 9
2/3/10 at 3:37pm
Reset/replace the CMOS battery. It might be dead
Reply
Reply
post #3 of 9
2/3/10 at 4:09pm
Thread Starter 
Steve, if it was the CMOS battery wouldn't there be other symptoms?. The time and date is correct.
Reply
Reply
post #4 of 9
2/3/10 at 8:18pm
If you can see the screen on an external monitor, more likely that the inverter is failing.

cheers ...
Reply
Reply
post #5 of 9
2/4/10 at 12:10am
Thread Starter 
ghn is there a way to check if the inverter is bad?
Reply
Reply
post #6 of 9
2/4/10 at 2:31am
Because tapping once worked could it just be a bad connection? Just asking not my area.
Reply
Reply
post #7 of 9
2/4/10 at 5:02am
Quote:
Originally Posted by yo_dan View Post
ghn is there a way to check if the inverter is bad?
Personally? No. But powerpack had a good point there, you can try re-seat all the LCD cables first, maybe there is some related issues.

cheers ...
Reply
Reply
post #8 of 9
2/4/10 at 12:58pm
Thread Starter 
OK, will check the connections and cabling.
Reply
Reply
post #9 of 9
2/4/10 at 1:07pm
Cool. Let us know how it goes.

cheers ...
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Other Brand Discussion