New Posts  All Forums:Forum Nav:

D620 Video issues?

post #1 of 7
Thread Starter 
Hello, I was given a dell d620 with a broken screen. Looked like it was cracked down the middle. I replaced the screen (not the lid or hinges). It makes a clicking/cracking type noise when I open the lid. No visible cracks. Now, sometimes when it boots, i get vertical lines and sometimes dollar signs before Windows boots. Windows DOES boot fine with no lines whatsoever. I have researched and found the symptoms are the same for a bad vid card. (I know this has Integrated graphics). If my card was bad, would Windows still boot and look normal? Why would it only affect the boot screen? TIA
post #2 of 7
Plug in an external monitor first and check to be sure that the same behaviour occurs.

cheers ...
post #3 of 7
Thread Starter 
Quote:
Originally Posted by qhn View Post
Plug in an external monitor first and check to be sure that the same behaviour occurs.

cheers ...
Tried to add an external monitor but it would not see that it was connected. I can't be sure the port works. I do have Windows 7 installed. There are no drivers for Win7. The device manager says there was a problem with the Nvidia and it has been stopped. Once Windows 7 loads the graphics are fine.
post #4 of 7
Sounded like a bad cable connection or a bad LCD to me at the moment.

cheers ...
post #5 of 7
Thread Starter 
Quote:
Originally Posted by qhn View Post
Sounded like a bad cable connection or a bad LCD to me at the moment.

cheers ...
I can rule out the bad LCD as it is brand new. I also replaced the inverter. How do add an external monitor under Win7 (besides Win+P)?
post #6 of 7
FN keys combination to switch between LCD and external or go into the display properties.

cheers ...
post #7 of 7

FN F8 usually toggles between the LCD and the monitor.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Dell Notebooks - General