New Posts  All Forums:Forum Nav:

Gary's Sagar 4750 Review - Page 6

post #101 of 121
8/3/04 at 5:29pm
Thread Starter 
if as3 cuts down the load temps by 9C then im willing to take the risk to put it on room temp is about 26C
Reply
Reply
post #102 of 121
8/3/04 at 7:46pm
I'll definitely put up some pics when I get the lappy Ogre. I didn't order the lappy set up with operating system 'cause I've got my own copy of XP Pro. I've been reading about some of these driver issues and was wondering if it was going to be a problem. Hope not, I'm no PC wiz. I sure am liking all the info I'm picking up here in this forum though, Thanks to all of you. Anyone know how long it will take to get my lappy? I ordered with credit card about a week and a half ago and have pretty much only received confirmation of purchase.
________________________________________________________________________

Can't wait for my 4750-V | 17" WSXGA+ | Athlon 64 3400+ | ati 9700 128meg | 1 Gig Ram | 60g 7200rpm HD | Bluetooth | Red/Blue Chameleon, High Gloss |
Reply
Reply
post #103 of 121
8/3/04 at 10:34pm
They may be understocked, but it took me 2 weeks with a check payment to recieve my laptop.
Reply
Reply
post #104 of 121
8/4/04 at 10:44am
Quote:
Originally Posted by spankinztine
I'll definitely put up some pics when I get the lappy Ogre. I didn't order the lappy set up with operating system 'cause I've got my own copy of XP Pro. I've been reading about some of these driver issues and was wondering if it was going to be a problem. Hope not, I'm no PC wiz. I sure am liking all the info I'm picking up here in this forum though, Thanks to all of you. Anyone know how long it will take to get my lappy? I ordered with credit card about a week and a half ago and have pretty much only received confirmation of purchase.
________________________________________________________________________

Can't wait for my 4750-V | 17" WSXGA+ | Athlon 64 3400+ | ati 9700 128meg | 1 Gig Ram | 60g 7200rpm HD | Bluetooth | Red/Blue Chameleon, High Gloss |
The is an EXACT sequence for applying the Driver updates. They are listed in the manual. If you follow this sequence, you should not have a problem.

What they don't say is. Load WINP SP1 and all updates Before you apply the drivers.
Reply
Reply
post #105 of 121
8/4/04 at 5:13pm
so what's the final verdict on the AS3 issue?
does it make a difference?
Reply
Reply
post #106 of 121
8/4/04 at 5:24pm
Thread Starter 
power profile : always on
proc speed 2.23GHz (full speed) @ 46*C idle
HDD @ 43*C idle
Reply
Reply
post #107 of 121
8/4/04 at 5:25pm
how would as3 on the cpu affect the hard drive?
Reply
Reply
post #108 of 121
8/4/04 at 5:26pm
Thread Starter 
it doesn't i just put that in there
Reply
Reply
post #109 of 121
8/4/04 at 5:28pm
you did? I didn't know you could? That and the gpu are really were the as5 need to ago, since that covers the gaming keys and left arm rest.
Reply
Reply
post #110 of 121
8/4/04 at 5:32pm
Thread Starter 
open up mobile meter
frequency: 2.23GHz
Temperature: 46*C
Charge Rate: 0.00w
HDD #0: 43*C
Reply
Reply
post #111 of 121
8/4/04 at 5:52pm
alright, so how do you apply as3 to the hard drive?
Reply
Reply
post #112 of 121
8/4/04 at 7:28pm
You don't
Reply
Reply
post #113 of 121
8/4/04 at 7:47pm
Thread Starter 
lol
you dont apply as3 to the hard drive
i just added the hd temp in there just for fun
i didn't do anything to the hd
for some reason when the fans are running it reduces the heat in the hd too however when i opened it up i didn't see any vents or anything leading to any fans..

right now was idle for about 45 minutes cpu temp is 46 and hd temp is 42
Reply
Reply
post #114 of 121
8/4/04 at 7:48pm
Thread Starter 
as3 only goes on the proccessor core and/or the gpu core..i haven't opened the whole casing up and i dont really intend to yet. they've sent me the bluetooth moduale in the mail and im guessing i might have to connect some wires where i'll have to open the casing if so then i'll apply the as3 on the gpu core too maybe even the gfx memory if there's anything over them cooling them
Reply
Reply
post #115 of 121
8/5/04 at 12:27am
I forgot about the gpu memory. That is what causes problems overclocking so I bet it would improve it.
Reply
Reply
post #116 of 121
8/5/04 at 4:53pm
did you receive the targus 312 bag yet? if so, how well does it fit?
Reply
Reply
post #117 of 121
8/5/04 at 5:34pm
I received the 315. 2 days before the laptop.
Reply
Reply
post #118 of 121
8/5/04 at 11:27pm
Thread Starter 
haven't got it yet..should be here soon...hopefully...
Reply
Reply
post #119 of 121
8/6/04 at 11:00am
Thread Starter 
its been a couple dayz now since i put the as3 on and its starting to set in. at always on ...2.23GHz the idle temp is now 42*C
Reply
Reply
post #120 of 121
8/6/04 at 11:00am
i ordered some as5 from newegg. i will let you know how that works.
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Sager & Clevo Notebook Reviews