New Posts  All Forums:Forum Nav:

problems with BIOS, 5620

post #1 of 11
5/25/03 at 12:27pm
Thread Starter 
I downloaded BIOS upgrade from http://www.clevo.com.tw/download/ftp...=1&submit=+GO+

File BIOS110a.zip

After I upgraded the BIOS, my hardrive seems to be freezing for 1-2 seconds very often whatever I do (read the forums, play games, winword...etc). I haven't had such troubles before the BIOS upgrade. Therefore I was wondering if I installed the right BIOS version ...what did I do wrong? Or did I miss something in my new BIOS settings...?

Is there a way to install the original BIOS version again (which usually comes with the sager notebook when you order it)???

Could anybody with the same (or similar) bios version copy and write the settings of their bios...please, so I could check them with mine and correct whatever I did wrong...


Thanks a lot
Reply
Reply
post #2 of 11
5/25/03 at 1:15pm
Did it not make a backup of your current BIOS prior to putting the new one on? Just re-run the flash program and point to your backup BIOS file.

-myrkat
Reply
Reply
post #3 of 11
12/4/03 at 10:22pm
I have the latest bios from Sager with the keyboard bios also. If you want them, send me an e-mail.
Reply
Reply
post #4 of 11
12/5/03 at 12:24am
That's one helluva bump!

-myrkat
Reply
Reply
post #5 of 11
9/6/04 at 12:50pm

Problem updating

Hello i have the same problem than Ispirty.

So I downloaded two bios from internet (56bios1109.zip and bios110a.zip) and i am trying to downgrade to 1109. I am using a boot disk but it doesn't works.

The Flash utility shows the next message:

Cannot flash when Memory Managers (e.g. HIMEM) are present.


What can i do to solve this problem and update my system??


Thanks.
Reply
Reply
post #6 of 11
9/6/04 at 2:19pm
On your floop disk (Autoexec.bat), you will need to comment out (REM) the load of the memory managers. Then it should work upon your next boot.
Reply
Reply
post #7 of 11
9/6/04 at 6:00pm
Yeah !!!!!! It worked thanks G-Omaha, now my hard disk doesn't freeze.
Reply
Reply
post #8 of 11
9/6/04 at 8:09pm
I tried to send the exe file from sager. For some reason Bellsouth is not allowing the file to be send to Farru. I am glad you could solve the problem. If you still need them, let me know. I will try some other way.
Reply
Reply
post #9 of 11
9/7/04 at 4:23am
Hello i have another question, now my system has the bios file 1109 and keyboard bios 1.00.15

Would be any problem with that or i should have another keyboard bios?

P.D. Sorry for my poor english, i am learning ;-)
Reply
Reply
post #10 of 11
9/7/04 at 1:39pm
Quote:
Originally Posted by jrceng
I tried to send the exe file from sager. For some reason Bellsouth is not allowing the file to be send to Farru. I am glad you could solve the problem. If you still need them, let me know. I will try some other way.
Change the file extension (Last three characters) to something else (like .DOC) and resend it. Farru would need to rename the file to the correct name before using.
Reply
Reply
post #11 of 11
12/20/05 at 5:55pm

Keyboard bios

farru - where did you get the keyboard bios?
I have installed 1.01.0a without problems (and the computer seems to work correctly) but my keyboard bios is still 1.0.11. :-(

BTW. Does anyone know how to change the shadowing of bios and video memory? Don't want it - but can't turn it off in bios :-(

/Roy
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Drivers