New Posts  All Forums:Forum Nav:

Catalyst 4.10 are out

post #1 of 14
10/14/04 at 5:41pm
Thread Starter 
http://www.ati.com
Reply
Reply
post #2 of 14
10/14/04 at 5:51pm
hopefully there'll be an omega update soon
Reply
Reply
post #3 of 14
10/14/04 at 6:29pm
The Dhmod tool 2.0b from driverheaven.net does not work with the 4.10 drivers. I tried many times and could not get the driver installed so I went back to 4.9. Am I the only one with this problem or does the Dhmod tool not work with the 4.10 drivers?
Reply
Reply
post #4 of 14
10/14/04 at 6:39pm
Quoted from rage3d.com:

"For those of you waiting on the new Catalyst 4.10 drivers from ATI, the good news is that they will be released later today and will include the new Catalyst A.I feature. The bad news is that they won't be newer than the 8.07 betas released a couple of weeks ago and won't feature the 256MB bug-fix."

Um, yes, this was pointless. X0D They should have just released another hotfix.
Reply
Reply
post #5 of 14
10/14/04 at 11:58pm
Quote:
Originally Posted by rct23
Am I the only one with this problem or does the Dhmod tool not work with the 4.10 drivers?
No your not the only one .. Didn't work here either ..
Reply
Reply
post #6 of 14
10/16/04 at 11:56pm
There is a way to mod the 4.10 drivers with the Dhmod tool. Go to http://www.driverheaven.net/showthre...325#post467325 to learn how to get it to work.
Reply
Reply
post #7 of 14
10/17/04 at 4:00am
When i try to install the new drivers, it says that it cannot detect the necessary hardware. I have a Mobile Radeon 9800. Any help would be appreciated.
Reply
Reply
post #8 of 14
10/17/04 at 4:05am
Use the mod tool like everyone here has been talking about first!

stu
Reply
Reply
post #9 of 14
10/17/04 at 4:23am
To mod the Catalyst 4.10 driver files, you must:

-Run the 4.10 driver setup
-After it says it cannot install driver (and before you mod the file with the Dhmod tool), search for the file " CX_18115.inf " in C:\ati\support\blablabl\dirver\2KXP_INF and open it
-There is a section called "ATI.MFG.ntx86", delete the ".ntx86" so that you get "ATI.MFG"
-Save the file then start the modtool
-The 4.10 drivers should now install correctly

This is a quick way to fix the modding problem with the 4.10 drivers and it should work if you do it correctly.
Reply
Reply
post #10 of 14
10/19/04 at 4:20am
I opened and altered the CX_18115.inf file found here <C:\ATI\SUPPORT\wxp-w2k-catalyst-8-062-040929a-018115C\Driver\2KXP_INF> with the following information and it worked!

Original:

[Manufacturer]
%ATI% = ATI.Mfg, NTx86

[ATI.Mfg.NTx86]

Altered:

[Manufacturer]
%ATI% = ATI.Mfg

[ATI.Mfg]

MB
Reply
Reply
post #11 of 14
10/19/04 at 11:27am
Ya, thats basically what I just said in my previous post.
Reply
Reply
post #12 of 14
10/19/04 at 8:07pm
One thing to add, though - I found this would only work if you first cleared the C:\ATI folder. Apparently if you have another modded driver in there it can interfere (mentioned in the same thread on Driver Heaven).

So kill the ATI folder, THEN do the procedure, and you should be gold.
Reply
Reply
post #13 of 14
10/20/04 at 12:20am
hope it works with omega!!
Reply
Reply
post #14 of 14
11/2/04 at 9:22pm

dh mod tool with mr9800

am i missing something? the drop down list for this mod tool doesn't support the 9800...i follow the procedures and it didn't allow the catalyst to work...any ideas?
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home