New Posts  All Forums:Forum Nav:

Booting from USB Hard Drive with 9860

post #1 of 4
11/20/04 at 11:32pm
Thread Starter 
I've spent hours trying to make this work. I made the USB HDD as the first Boot Devive and the CD as the second. The USB Hard Drives do not need the Promise Drivers but I did try it with and without them. I was trying to install WinXP on them but when Windows Setup Boots the first time I get the STOP 0x7B - Inaccessible Boot Device. I tried it on a 9mm Drive Enclosure and a 3.5in Drive Enclusure. Both HDD's got the same error.
Reply
Reply
post #2 of 4
11/21/04 at 2:14am
I found an article on the error u had... it mentions pressing f6 before the setup screen and changing the device
http://support.microsoft.com/?kbid=122926
I cant test it out.. but i thought it might be of some help to you.
Reply
Reply
post #3 of 4
11/21/04 at 3:00am
Thread Starter 
Quote:
Originally Posted by nightmare
I found an article on the error u had... it mentions pressing f6 before the setup screen and changing the device
http://support.microsoft.com/?kbid=122926
I cant test it out.. but i thought it might be of some help to you.
Thanks for trying to help. I have feeling it will not work with NTFS and might only work for DOS or Linux booting.
Reply
Reply
post #4 of 4
11/21/04 at 1:13pm
Thread Starter 
I've read enough already that it is quite clear that getting a USB Hard Drive to Boot WinXP/Win2K with NTFS is nearly impossible so I'm giving up on the idea for now until someone finds and easy solution.
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home