NotebookForums.com › Forums › Notebook Manufacturers › Gateway Notebook Forums › Gateway Notebooks › Ran 3DMark03 on my 7422GX
New Posts  All Forums:Forum Nav:

Ran 3DMark03 on my 7422GX - Page 2

post #21 of 31
2/22/05 at 6:37pm
I prefer radlinker, but just because I like its interface a little better. Personal preference thing. I don't know enough about the pros and cons of either to suggest one or the other.
Reply
Reply
post #22 of 31
2/23/05 at 3:20pm
Thread Starter 
For some strange reason ATITool no longer has my max core and max memory settings saved, although they were still saved there last time I shut down. Guess I'll try running the utility again to find max core/mem tonight.
Reply
Reply
post #23 of 31
2/24/05 at 2:12am
After you choose your core/mem press "set" then press "new" and name it whatever and in should save.
Reply
Reply
post #24 of 31
2/25/05 at 5:01pm
Thread Starter 
I ran ATITool again to determine the maximum settings and had some strange results. It raised the core speed up to 408MHz before it found any artifacts, which was no surprise since that is within 1 MHz of what it found last time. However when I ran the memory settings it would only go up to 207MHz before it found artifacts, last time it overclocked to 227MHz before finding artifacts. Why did it have artifacts so much sooner? It only overclocked 7 MHz before finding anything, that seems like not very much. Is my GPU damaged?

Thanks for all the help.
Reply
Reply
post #25 of 31
2/25/05 at 5:26pm
Nah, lower your core speed a few mhz and then test mem. If your core is a little to high when you test mem, and you get an artifact from core, the mem test thinks the mem is to high because it assumes core isnt causing any artifacts thus lowering mem even though it isnt the problem.
Reply
Reply
post #26 of 31
2/25/05 at 6:27pm
Thread Starter 
Quote:
Originally Posted by DNSerror
Nah, lower your core speed a few mhz and then test mem. If your core is a little to high when you test mem, and you get an artifact from core, the mem test thinks the mem is to high because it assumes core isnt causing any artifacts thus lowering mem even though it isnt the problem.
Thanks, I'll give it a try tonight. So maybe I should drop to the core down to 400?
Reply
Reply
post #27 of 31
3/1/05 at 1:30pm

atitools

Hello all, I'm new to this forum. I hope you guys can help with my Gateway 7422GX that i just purchased.I would like to bump up the performance a little more. What site can I download the Atitools program to overclock my video card? Other then the HD is there any other Mods. that increase performance? Thanks.
Reply
Reply
post #28 of 31
3/2/05 at 12:39pm
http://www.techpowerup.com/atitool/
Reply
Reply
post #29 of 31
4/12/05 at 3:27pm
Quote:
Originally Posted by RyanFL
No modifications or overclocking.

3DMarks 2381
CPUMarks 619

I don't even know if this is very good. Any comments?
I used the Forsage 5.3 Final driver to Mod the Ati 9550 to a "FireGL T2" and the 3dMark03 jumber to 2705 with no OC. Before the mod I had the same benchmark as you did... about 2380ish.
The firegl mod may not be "real" however...but the gaming certainly does get a boost. Probably the Omega would do the same thing...
http://www.rojakpot.com/default.aspx...ar1=105&var2=0
Reply
Reply
post #30 of 31
4/26/05 at 3:05am
3dmark03=3344
3dmark01=12797

oc'd to 444/240
cpu at 2.34ghz

got 1gb pc3200 and 5,400rpm hdd,

not bad.
Reply
Reply
post #31 of 31
4/26/05 at 3:11am
Here are my specs
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Gateway Notebooks
NotebookForums.com › Forums › Notebook Manufacturers › Gateway Notebook Forums › Gateway Notebooks › Ran 3DMark03 on my 7422GX