NotebookForums.com › Forums › General Notebook Discussions › Notebook Guides › Simple Undervolting Tutorial - Pentium M Dothan
New Posts  All Forums:Forum Nav:

Simple Undervolting Tutorial - Pentium M Dothan - Page 3

post #41 of 1202
Thread Starter 
Quote:
Originally Posted by wbeck
Whitewind, Yes, a similar thing can be done. I assume you have the Athlon 64 processor. Check this link out. http://notebookforums.com/showthread...e+crystalcpuid

It works very well. The Athlon will never have the battery life of a Dothan, but it can get close. Using the program CrystalCPUID, I can bring my votage down to .800v which, you willnotice is darned close to where these Intel boys are getting their CPUs.
AMD mobile CPUs will still require more power than Intel mobile CPUs because their (AMD) wattage consumption is much higher.
post #42 of 1202
no further comments
post #43 of 1202
needle, please tell me you did not steal all of this info from the sites posted above.
post #44 of 1202
Quote:
Originally Posted by Enderet
needle, please tell me you did not steal all of this info from the sites posted above.
Stealing is too much of a strong word. It's the Internet.

And does it matter?
post #45 of 1202
Quote:
Originally Posted by Kenshino
Stealing is too much of a strong word. It's the Internet.

And does it matter?
It doesnt matter if its the internet or not. And does it matter? Of course it matters if its plagerism.
post #46 of 1202
Quote:
Originally Posted by Enderet
It doesnt matter if its the internet or not. And does it matter? Of course it matters if its plagerism.
Plagerism? I believe the people who posted this info elsewere had this sole intent of helping others. This guy here had the same intent, I salute him for even doing so.

Anyway, just to correct something, you will have to go set in the Torture test settings to use large FFTs if not the stress test isn't accurate.
post #47 of 1202
Quote:
Originally Posted by Kenshino
Plagerism? I believe the people who posted this info elsewere had this sole intent of helping others. This guy here had the same intent, I salute him for even doing so.

Anyway, just to correct something, you will have to go set in the Torture test settings to use large FFTs if not the stress test isn't accurate.
Then why did the person who made it contact me complaining, huh?
post #48 of 1202
Thread Starter 
Quote:
Originally Posted by Enderet
It doesnt matter if its the internet or not. And does it matter? Of course it matters if its plagerism.
Plagiarism is stealing someone else's work and presenting it as my own. I originally heard about undervolting on another forum. I was intrigued about the possibilities and read up (on several websites and forums) about how to accomplish it. I then attempted it on my laptop and it worked. I was happy with my results so I thought I would share my method with everyone else. What I did is called adaptive learning and sharing.
post #49 of 1202
Quote:
Originally Posted by needledik
Plagiarism is stealing someone else's work and presenting it as my own. I originally heard about undervolting on another forum. I was intrigued about the possibilities and read up (on several websites and forums) about how to accomplish it. I then attempted it on my laptop and it worked. I was happy with my results so I thought I would share my method with everyone else. What I did is called adaptive learning and sharing.
I never accused you, didnt I ask you first? Sheesh.
post #50 of 1202
Quote:
Originally Posted by Enderet
Then why did the person who made it contact me complaining, huh?
Not that I'm doubting your words because you pissed me off but I don't see why the **** that guy contacts you instead of him.
post #51 of 1202
Maybe because I am a forum moderator?
post #52 of 1202
Thread Starter 
Quote:
Originally Posted by Enderet
I never accused you, didnt I ask you first? Sheesh.
I didn't say you did. There's no need for hard feelings. We're all here to help each other, right?
post #53 of 1202
I see I see, still this thread helps others, I think whoever complained didn't find out by himself either.
post #54 of 1202
Well he saw it fit to complain, as he feels he did not get any credit for the hard work that he did.

Needledik, what forums/sites did you take this info from?
post #55 of 1202
Didn't read the other posts linky but unless you did a word for word or an idea for idea, then it is not plagarism...i mean underclocking has been around for a long time. I mean is it to say that if someone posted an overclocking guide it would be plagarism? Same thing applies here IMHO. But if it were the case that the two posts looked suspiciously similar, then it would be IMHO that credit should be given where credit is due.
post #56 of 1202
This is such a great thread! Here are my results using an i9300 1.6GHz Pentium M Sonoma:

Initial Voltages:
1.356v (Max) @ 1600MHz with a CPU temp of 130F (100% load); Idle CPU temp is 84F
0.988 (Min) @ 800MHz with a CPU temp 93F (100% load); Idle CPU temp is 82F

Custom Voltages:
- 0.908v (Max) @ 1600MHz with a CPU temp 95F (100% load); Idle CPU temp is 82F
- 0.700v (Min) @ 800MHz with a CPU temp 86F (100% load); Idle CPU temp is 82F

So there is a 33% reduction in voltage at 1600MHz and it runs 35 degrees cooler. AMAZING! At 800MHz there is a 29% reduction in voltage and it runs about 7 degrees cooler. My guess is if the ambient temp was cooler then there would be a more noticable difference at 800MHz.

I used Prime95 and PCMark04 to "stress test" the settings. I am currently stressing it again with Prime95. One warning when using Prime95, make sure when you run the stress test, you test it with the 1024K FFT length. I ran the CPU at a lower voltage with 768K FFT length, but then it failed at the higher lengths.

The CPU fan was set at "slow" or the "low" setting. Ambient temp is around 76F. The laptop has been sitting on my lap the whole time as well. The air coming out the back (at 100% load) feels cold on my hand.

My CPU (even at 100% load) is the coolest running hardware in my laptop.

I did screw around with the GPU (Geforce 6800 Go 256MB) and got the settings up to 361MHz Clock / 731MHz Memory. A 3DMark05 score of 3940. This video card, with the fan on, runs around 49C (celcius) and in the middle - upper 50's (celcius) after running 3DMarks05 (GPU tests only).
post #57 of 1202
That's awesome Asdasl! Great results. I'm hoping that I can get similar outcomes with my m70 when it arrives. Although I have a 2.0ghz in it so I'm sure it won't be quite the same.

Tellerve
post #58 of 1202
Actually plagerism isn't just word for word, its even using someone elses idea without giving credit. It doesn't apply to "common knowledge" things obviously. The amount of posts here that would count as plagerism would be huge going by the true definition. We would all have to cite our sources, give credit to ideas we got from other members or websites, and really it would be a pain in the ass. The OP never said it was his idea and all what you had to do Enderet was post the links. No mellowdrama was necessary.
post #59 of 1202
Links were posted.
post #60 of 1202
Quote:
Originally Posted by mawst95
Actually plagerism isn't just word for word, its even using someone elses idea without giving credit. It doesn't apply to "common knowledge" things obviously. The amount of posts here that would count as plagerism would be huge going by the true definition. We would all have to cite our sources, give credit to ideas we got from other members or websites, and really it would be a pain in the ass. The OP never said it was his idea and all what you had to do Enderet was post the links. No mellowdrama was necessary.
I think you made up your own definition.

plagiarism

n 1: a piece of writing that has been copied from someone else and is presented as being your own work 2: the act of plagiarizing; taking someone's words or ideas as if they were your own [syn: plagiarization, plagiarisation, piracy]

He didn't say that he came up with that idea. So it's not plagiarism.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Notebook Guides
NotebookForums.com › Forums › General Notebook Discussions › Notebook Guides › Simple Undervolting Tutorial - Pentium M Dothan