New Posts  All Forums:Forum Nav:

post 3DMark05 scores here - Page 3

post #41 of 79
Seriously. In 3DMARK the CPU dont have much to say. I bet you that the 6xx series is a lot faster than the M series.
post #42 of 79
Quote:
Originally Posted by guilherme
It doesn't matter. You can install/run 3DMark05 both before and after overcloking. It really doesn't matter.
However, you should install it/run at stock settings then after OC'ing run it againg and compare the results.
Guilherme
Defragging before each subsequent benchmark run can return favorable results.
post #43 of 79
I'm not sure why I'm running faster than many... I'm using the XG 77.76 drivers (as suggested).

Nothing is overclocked:

D900T
P4 3000 MHz
512 MB DDR2 (266.7 MHz) (yeah, i know. i'm upgrading to 1gb soon)
Geforce FX Go 6800 Ultra 256mb
Win XP Pro SP2

3DMark 05 score: 4994
post #44 of 79
Desktop:
Aquamark = 70,648
3dMark 01= 22,328
3dMark 03= 13,390
3dMark 05= 5,899
Laptop:
3d mark 01= 12,259
3d mark 03= 3,647
3d mark 05= 1,818

Desktop CPU is OC'd to 2.6 Ghz from 2.2 Ghz, and the video card is OC's from 400Mhz/1.10Ghz (core/memory) to 461Mhz/1.21Ghz (core/memory)

Laptop video card is OC'd from 405/270 to 516/300ish

Apparantly i didnt run aquamark on my laptop,but i think its somewhere around 27,000
See sig. for specs
post #45 of 79
Upper 5100's to low 5200's on 3dmark05 on my xps 2
post #46 of 79
Has any benchmarked their 7620? If so could they post the results?
post #47 of 79
5720 lappie/2g ram/c2.13/7800card

default settings 6770 3dmark05
coolbits 2.0 auto overclock 7790 3dmark05

post #48 of 79
sig!
post #49 of 79
With a stock
Pentium4 3.4
1 gig RAM
ATI x800
2x60 SATA RAID 0

4077
post #50 of 79
3DMARK05 6710 with 81.94 Drivers.
post #51 of 79
See Sig...
post #52 of 79
Quote:
Originally Posted by SGG
5720 lappie/2g ram/c2.13/7800card

default settings 6770 3dmark05
coolbits 2.0 auto overclock 7790 3dmark05

I have coolbits 2.0 and see no "Auto OC" setting, are you referring to "Auto Detect"? When I auto detect, my frequencies stay the same, am I doing something wrong?

Thanks in advance...
post #53 of 79
Sager NP-5320
1.86GHz Pentium M
2GB OCZ DDR2
256MB X700

OC'ed 400:400 3213.

Default: 2811
post #54 of 79
Its in my sig.
post #55 of 79
I get 6725 with 79.31. Any newer drivers are around 6.5k, specs in sig.
post #56 of 79
Sager 9750 / 4800+ X2 (2.4 GHz Dual Core) / 2GB DDR / 80 GB SATA / Nvidia 7800 Go GTX 256MB

3DMark05 @ Driver version 82.12 = 6860 (default clock speeds)
3DMark05 @ Driver version 82.12 = 7717 (450Cpu / 1200 Mem OC using driver tab)
post #57 of 79

Sager NP5720-C 3DMark05 Score

Sager NP5720-C
Intel P-M 780 2.26GHz - Not OC'd
1GB RAM - OCZ - 2-512MB SODIMMS - Dual Channel
60GB 7200RPM SATA HDD
nVidia GeForce Go 7800 GTX 256MB VRAM DDR3 - Full resolution, Not OC'd
ForceWare 81.94
WinXP Pro fully patched to date
McAfee VirusScan 8.0i with Access Scan disabled


6833 3DMarks
No AA,AF,Default config
first try, out of the box

BIOS modded the GPU
7503 3DMarks
Core:450 Mem:1200

post #58 of 79
Rock XtremeCT aka 5720

DRV: 81.95
CPU:+12%
GPU:480/1300

3Dmark05: 8000
post #59 of 79
Hypersonic FX 7
AMD X2 4800, Geforce 7800 GTX
Mild GPU OC gets me 7607 on 3dMark05
post #60 of 79
7104 in 3dmark05 when I clock mine to normal GTX clocks (430/1200)

Man, I wish Clevo would release newer drivers that work properly with the D900T. All newer drivers give me a lower score :/ (79.31 is the best driver)
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Sager & Clevo Notebooks