NotebookForums.com › Forums › General Notebook Discussions › Notebook Forums - General › Pentium 725 vs. 730 - 133FSB difference
New Posts  All Forums:Forum Nav:

Pentium 725 vs. 730 - 133FSB difference

post #1 of 19
Thread Starter 
This is the only difference I see between the 725 and the 730 processors. Is 133 MHz FSB that significant? I was checking the Dell i6000, and last Friday it had the 730, but today it has the 725. Is it possible to get them to change it back if I order?
post #2 of 19
That is correct, it will mean very small on most laptop...

But if used on an Asus Z71V, that is a lot. If you use a 400FSB Dothan in it, you could easily overclock it by setting 533FSB and having it run sweet..

For example: 1.6 400FSB Dothan, stick that in the Asus Z71V it will run at 2.13 533FSB Dothan eheheh
post #3 of 19
Quote:
Originally Posted by Lone_Prodigy
This is the only difference I see between the 725 and the 730 processors. Is 133 MHz FSB that significant? I was checking the Dell i6000, and last Friday it had the 730, but today it has the 725. Is it possible to get them to change it back if I order?
they sent you the wrong processor?
post #4 of 19
Don't mind me, just subscribing to this thread. I like your idea smilepak.
post #5 of 19
Here is a result...

Dude!!! HUGE SUCCESS!!!

Order Intel Pentium M 1.7 -- 400FSB off ebay for $160.00

Received it today, install it with AS5

Boot up, BIOS will show 1.7...

Once into windows, calculated out to 2.26GHz!!!!!!!

Currently running at full speed w/o undervoltage. Average temp on casual usage according to Mobile Meter...58c!!!!

Dude! This is sweet.

Did a SandraSoft Speed Test....

SiSoftware Sandra

Benchmark Results
Dhrystone ALU : 9603 MIPS
Whetstone FPU : 3114 MFLOPS
Whetstone iSSE2 : 3997 MFLOPS

Performance Test Status
Run ID : VEGETA-DBZ on Thursday, June 30, 2005 at 6:54:28 PM
NUMA Support : No
SMP Test : No
Total Test Threads : 1
Multi-Core Test : No
SMT Test : No
Dynamic MP/MT Load Balance : No
Processor Affinity : PP0
Number of Runs : 64000 / 640

Processor
Model : Intel(R) Pentium(R) M processor 1.70GHz
Speed : 2.26GHz
Performance Rating : PR2713 (estimated)
Type : Mobile
L2 On-board Cache : 2MB ECC Synchronous, ATC, 8-way set, 64 byte line size

Chipset 1
Model : ASUSTeK Computer Inc ??? (2590)
Front Side Bus Speed : 4x 133MHz (532MHz data rate)

Features
SSE2 Technology : Yes
SSE3 Technology : No
HTT - Hyper-Threading Technology : No

Performance Tips
Notice 5008 : To change benchmarks, click Options.
Notice 5004 : Synthetic benchmark. May not tally with 'real-life' performance.
Notice 5006 : Only compare the results with ones obtained using the same version!
Warning 5009 : Mobile processors yield lower indexes in power management modes. Check power settings if index is low.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
post #6 of 19
Wow! Is that the PM 735??? It's $249 at newegg!!
post #7 of 19
smilepak how stable is that, it seems very detramental to the laptop.
post #8 of 19
It's not at all. Search for "dipswitch"- it will only generate a little bit more heat.
post #9 of 19
post #10 of 19
i run a 745 @ 2.4ghz with no problems at all.. so ya.. it is almost a sure thing for a 2.26 and definetly problem-less for a 1.6@2.13
post #11 of 19
I have a toshiba tecra with a Dothan 1.7 in it..what do you think this thing will OC to..
post #12 of 19
is the change from a 400 to 533 only doable on the z71v? or any notebook w/ a dothan core
post #13 of 19
i wonder if asus will let you do it on the z70v refresh
post #14 of 19
Quote:
Originally Posted by sxm
i wonder if asus will let you do it on the z70v refresh
the z70v does not have the dipswitch
so i am 99% sure you can't do it on the z70v-refresh either
post #15 of 19
well the what is the difference between a regular 2.1 (highest so far) and this oc. Is that just the highest u can oc? because if thats all then what a way to save money.
post #16 of 19
ohhh and for the z71v what is the model # of the cpu like a 735 or somethin?
post #17 of 19
run everything at the higher fsb, drop your multiplier and you can drop power conspumption as well

the benefit of running higher fsb is that OTHER components go faster as well and your cpu is not strained as much
post #18 of 19
i don't really know the difference
i think it is the same, everything about the processor is the same
post #19 of 19
Quote:
Originally Posted by sxm
is the change from a 400 to 533 only doable on the z71v? or any notebook w/ a dothan core
You could do it with most notebook. However, you could do it fairly easy with Z71v.

On the Z71V there is a dipswitch next to the CPU. All you have to do is flip the switch up or down for 400FSB or 533FSB.

With other notebook you have to pull out some copper wire and manually do a pin modding by connecting certain pins together using copper wire. This is a little more difficult and tricky to do.

Z71V is the only laptop I know of that uses the dipswitch. Which making it the overclocking laptop dream machine!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Notebook Forums - General
NotebookForums.com › Forums › General Notebook Discussions › Notebook Forums - General › Pentium 725 vs. 730 - 133FSB difference