You only need the dongle during the installation. After the installation you can use the Truemobile. And all the extra features will be functional.
About your problem with the drivers. Did you rename the files in the inf folder?
Also, you can disable bluetooth from the bios if you want.

I realize. When I was using the dongle I could access the extra mouse buttons no problem. As soon as I switched to use the built in BT, I lost access to customizing the mouse buttons. You keep mentioning this "Truemobile." I don't know what you're talking about. Also, I did rename the files in the INF folder, and I'm reverting back to the Dell BT drivers, since they worked just fine and I could actually disable BT when I'm not using it!

I'm going to buy a refurb mx900, seller allow me not to buy BT hub.

Could you please install this mod: uberOption, then verify whether setpoint allow to change buttons setting without logitech hub ?

Thank you

Awesome guide! I can finally install the Logitech software for my v270.

Hrm, I'm having a problem getting the headset to work with these drivers...

There is my original post but its kind of gone off topic of the original post but all of my posts say what I have, what I've done, and now the issue I'm currently having.
http://www.notebookforums.com/showthread.php?t=132556

OK... weirdness just happened. The keyboard of my MX5000 set had stopped working because something in the driver software went bunko. Uninstalled everything [setpoint, wildcom stack, the BT 350 module] and even disabled the built in windows stack per the ms website instructions.

Restart and windows recognizes then automatically installs its own stack for the bt350 module... no chance to select "cancel". On a whim I tried to add the mouse and keyboard using the windows interface only... low and behold they both worked! No using the Logitech dongle or software.

The MX1000 mouse works as it had before [after originally installing it per the guide], both the scroll wheel and back/forward browser buttons work. Response on the keyboard is fine, but the only advanced keys working are the touchpad volume control and "email". Hitting the "Media" key will open Winamp but the other controls [play/pause/ff/rew] do nothing.

In a bit I'll try installing the Logitech drivers on top of the windows bt stack and see if all the "special" functions will start working.

I am having a similar problem. My HS 850 was working fine with my Toshiba BT Drivers on my Dell Inspiron 9300. Now with Widcomm 5 - 802 installed I can pair and connect to the Motorola Headset HS 850, but I cant use it functionally for Voice Conference using Skype or any other app. How can I make it work?

PS: I dont have any Logitech devices so I skipped those steps. Is this Widcom 5 package completely functional.

Suggestions?

Should I go back to Dell Toshiba drivers or try the Widcom v4. Please point me to something that works for the Voice con on Dell 9300 with BT 350

BTW - Windows sound has 3 devices
- Soundcard - Sigmatel
- Bluetooth Audio
- Highqualit Bluetooth Audio

Tried all possible selections. No results.

From reading threads on other sites the slightly older [5.0.1.801] Wildcomm stack is a bit better than the newest build [5.0.1.802] when it comes to compatibility.

http://ftp.us.dell.com/network/R115564.EXE

Latest Toshiba Bluetooth stack & firmware has been uploaded to Dell's ftp server today...

FWIW: Looks like the firmware is the same version as the previous release: http://support.dell.com/support/down...&fileid=147257

Thanks. I had installed this back in November when it came out. With the Firmware upgrade and the patched WIDCOMM 5.0 life... its PERFECT.. almost

BTW - I found a solution to this problem. I hate WAITING on things. Now, the HS was set up for auto connect. So as soon as I flip it open it auto connects. The problem was to USE it with the voice.

Now after your posting this I woud CLICK on the laptop to disconnect and then reconnect.. and then wait those 4 beeps. FUN ISNT IT.

I found a work around . As soon as I open it and place it on my ear it connected. BUT AT THE MOMENT I STILL DONT HAVE AUDIO. (in Toshiba it would switch audio as soon as HS was open and on my ear). Here its better.. All I do after this is PRESS THE BUTTON on the HS. BOOM!

It makes that BELUP sound and I'm in . Wooo Hoo.

PS: Thanks for the info. I hope this helps some other people who dont like to wait.

new FW + WIDCOMM is nice, but I get a lot of lag with my headset. Sounds breaks up and a BT mouse is useless when using the headset.

Pretty good and workable, but not what I envisioned.

Anyone success with MX900 ? me can't (
I followed step by step this guide, but setpoint 2.47 does not provide customized btn function when paired with TM350. I tried Widcomm 5.0.801 and 5.0.802.

you have to use the one that is linked in this guide along with a patch...I tried what you said and had the same result...follow the guide exactly along with the software provided and it will work

oh yeah...you have to use the SetPoint that came with your mouse from the CD, then update it...don't use the one off logitech's website...it won't work