XTreme-G MobileForce 91.31-v2.40 RELEASED! ... ... Great drivers! Thx!M1710, 2.16, 2GB, 7900GTXXTreme-G MobileForce 91.28-v2.40 (default image setting 'qual ...

brownstone · 06-09-2006, 06:06 PM

Great drivers! Thx!

M1710, 2.16, 2GB, 7900GTX

XTreme-G MobileForce 91.28-v2.40 (default image setting 'quality')
OC'ed 580/700=9217

XTreme-G MobileForce 91.31-v2.40 (default image setting 'quality')
OC'ed 580/700=9498

Thx penguin, It had slipped my mind about installing them that way.

Swat....no you don't have to flash your card, and in my opinion they are better than Dells drivers.

uuwuu · 06-09-2006, 06:32 PM

so, I'm going to say that these drivers have the BEST image quality I've ever seen!! I noticed details in 3dmark05 that I've never seen before. I lost a few points, but the IQ is simply amazing. colours are vibrant and everything comes to life.

Swat_R2 · 06-09-2006, 06:32 PM

Thanks brownstone, off to give them a try.

Pirx · 06-09-2006, 07:11 PM

Quote:

Originally Posted by brownstone

Setup.exe doesn't work.

So, is this a confirmed issue? The installer is broken?

Swat_R2 · 06-09-2006, 07:14 PM

All I did was point to the right directory when updating the drivers, setup.exe didn't crash - it just didn't load. Not a big deal, pointing to the dir did the trick.

Ran 3dMark05 right after and got pretty much the same score (within a 10 pt difference) so I'm happy.

Good job on the drivers!

brownstone · 06-09-2006, 07:29 PM

Swat did you remove the dell drivers first. It may not matter but just in case your not sure for next time....go to Control panel/ add/remove programs/select 'nvidia'

Then reboot into safe mode (F8) and run a program called driver cleaner pro which you should download. Just select 'nvidia' then clean. This makes sure that all the traces of old drivers are removed.

Boot back into windows and then install new drivers.

ACHlLLES · 06-09-2006, 09:20 PM

Doesn't work..

Swat_R2 · 06-09-2006, 09:30 PM

Yup. Uninstalled drivers, safe mode, driver cleaned, installed. Read the FAQ on the site to make sure first

Pirx · 06-10-2006, 06:35 AM

Quote:

Originally Posted by Swat_R2

Not a big deal, pointing to the dir did the trick.

What do you mean by that?

brownstone · 06-10-2006, 07:07 AM

Quote:

Originally Posted by Pirx

What do you mean by that?

I think what he meant was,

After uninstalling and cleaning drivers in safe mode.............when you boot back into windows, the 'new hardware found' pops up. Just tell it to look in the Xtreme-g folder you extracted the drivers to. Then it will install the drivers that way. This method can be used instead of running the setup.exe

Pirx · 06-10-2006, 07:28 AM

Quote:

Originally Posted by brownstone

After uninstalling and cleaning drivers in safe mode.............when you boot back into windows, the 'new hardware found' pops up. Just tell it to look in the Xtreme-g folder you extracted the drivers to. Then it will install the drivers that way. This method can be used instead of running the setup.exe

Is that equivalent to the method of running setup.exe? Setup.exe also installs some services, configures a few startup tasks, etc. Is all of this done with the other method as well?

But, independent of that, if setup.exe does not run, it still means that the package Tony offers for download right now is broken.

brownstone · 06-10-2006, 08:00 AM

Well using the method other than setup.exe, It still did install the control panel etc. and I don't notice anything missing and the drivers r running great.
True it still means that the download package is broken.

Swat_R2 · 06-10-2006, 09:16 AM

Looks like you might be on to something Pirx, setup.exe didn't work, but I'm thinking it was needed for something. Here's what I get when I bootup:

lancorp · 06-10-2006, 09:20 AM

Quote:

Originally Posted by Swat_R2

Looks like you might be on to something Pirx, setup.exe didn't work, but I'm thinking it was needed for something. Here's what I get when I bootup:

I get the same thing at startup, plus at shutdown, I get a nvc32svc.exe crash dialog...back to the stock Dell drivers.

brownstone · 06-10-2006, 09:24 AM

From what I understand, the error is because these drivers have been set to detect SLI cards aswell. Its just saying that SLI is disabled because basically you don't have a SLI card. It doesn't appear to effect performance at all.

I do not get the the nvc32svc.exe error like you though lancorp.

06-09-2006, 06:06 PM	#16
brownstone Registered User Join Date: Feb 2005 Posts: 601 Credits: -3	Great drivers! Thx! M1710, 2.16, 2GB, 7900GTX XTreme-G MobileForce 91.28-v2.40 (default image setting 'quality') OC'ed 580/700=9217 XTreme-G MobileForce 91.31-v2.40 (default image setting 'quality') OC'ed 580/700=9498 Thx penguin, It had slipped my mind about installing them that way. Swat....no you don't have to flash your card, and in my opinion they are better than Dells drivers. Last edited by brownstone; 06-09-2006 at 06:11 PM.

06-09-2006, 06:32 PM	#17
uuwuu epsilon-K stylezz Join Date: Jan 2006 Posts: 336 Credits: -182	so, I'm going to say that these drivers have the BEST image quality I've ever seen!! I noticed details in 3dmark05 that I've never seen before. I lost a few points, but the IQ is simply amazing. colours are vibrant and everything comes to life. __________________ PEANUTBUTTERXX: Inspiron 9300, 2.26 ghz P-M pinmod stylezzz, 1.5GB DDR2 Ram portions, 1920X1200 display pieces, pioneer slotloading dvd burner, audigy2zs, 80GB usb powered western digital HDD velcroed to the outside of the lcd, geforce go 7800gtx!!! Zeta Group Ltd. - Truth through Logic and Mathematics.

06-09-2006, 06:32 PM	#18
Swat_R2 Registered User Join Date: May 2006 Posts: 90 Credits: -322	Thanks brownstone, off to give them a try. __________________ XPS M1710 \| 1.83 Duo \| 1GB 667 \| WUXGA \| 512MB 7900 GTX \| 60GB 7200 \| AudigyMB \| 3DMark05 8331 - Stock Speeds

06-09-2006, 07:14 PM	#20
Swat_R2 Registered User Join Date: May 2006 Posts: 90 Credits: -322	All I did was point to the right directory when updating the drivers, setup.exe didn't crash - it just didn't load. Not a big deal, pointing to the dir did the trick. Ran 3dMark05 right after and got pretty much the same score (within a 10 pt difference) so I'm happy. Good job on the drivers! __________________ XPS M1710 \| 1.83 Duo \| 1GB 667 \| WUXGA \| 512MB 7900 GTX \| 60GB 7200 \| AudigyMB \| 3DMark05 8331 - Stock Speeds

06-09-2006, 09:20 PM	#22
ACHlLLES M1730, M90, &amp;amp;amp;amp;amp;amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp; amp Join Date: May 2006 Posts: 2,193 Credits: 3,504	Doesn't work.. __________________ M90\|T5500\|2GB \|FX 2500M\|160GB 5400RPM HDD\|WXGA\|Vista Ultimate \| 8X DVD+/-RW \| PRO/Wireless 3945\|350 BT & 3 Yr Mobility War. M1330\|T7500\|2.5GB\|8400M\|WLED(Toshiba!)w/ Cam\|120GB 5400RPM HDD\|& more! M1730\|2.4GHZ\|4GB\|320GB HD\|8800GTX SLI\|BT\|WIFI\|3Yr CCare

Notebooks For Sale

User Links

Latest Pricing

Top Posters

Todays Top Posters

Fastest Benchmarks

Latest Benchmarks

06-09-2006, 07:29 PM	#21
brownstone Registered User Join Date: Feb 2005 Posts: 601 Credits: -3	Swat did you remove the dell drivers first. It may not matter but just in case your not sure for next time....go to Control panel/ add/remove programs/select 'nvidia' Then reboot into safe mode (F8) and run a program called driver cleaner pro which you should download. Just select 'nvidia' then clean. This makes sure that all the traces of old drivers are removed. Boot back into windows and then install new drivers.

06-09-2006, 09:30 PM	#23
Swat_R2 Registered User Join Date: May 2006 Posts: 90 Credits: -322	Yup. Uninstalled drivers, safe mode, driver cleaned, installed. Read the FAQ on the site to make sure first __________________ XPS M1710 \| 1.83 Duo \| 1GB 667 \| WUXGA \| 512MB 7900 GTX \| 60GB 7200 \| AudigyMB \| 3DMark05 8331 - Stock Speeds

06-10-2006, 08:00 AM	#27
brownstone Registered User Join Date: Feb 2005 Posts: 601 Credits: -3	Well using the method other than setup.exe, It still did install the control panel etc. and I don't notice anything missing and the drivers r running great. True it still means that the download package is broken.

06-10-2006, 09:16 AM	#28
Swat_R2 Registered User Join Date: May 2006 Posts: 90 Credits: -322	Looks like you might be on to something Pirx, setup.exe didn't work, but I'm thinking it was needed for something. Here's what I get when I bootup: __________________ XPS M1710 \| 1.83 Duo \| 1GB 667 \| WUXGA \| 512MB 7900 GTX \| 60GB 7200 \| AudigyMB \| 3DMark05 8331 - Stock Speeds

06-10-2006, 09:24 AM	#30
brownstone Registered User Join Date: Feb 2005 Posts: 601 Credits: -3	From what I understand, the error is because these drivers have been set to detect SLI cards aswell. Its just saying that SLI is disabled because basically you don't have a SLI card. It doesn't appear to effect performance at all. I do not get the the nvc32svc.exe error like you though lancorp.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
XTreme-G MobileForce 91.37-v2.50 RELEASED!!!	Fenuxx	NBF MobileForce Drivers	146	11-26-2006 01:00 AM
XTreme-G MobileForce 83.60-v2.25 RELEASED!!!	Fenuxx	NBF MobileForce Drivers	67	04-16-2006 01:00 PM
XTreme-G MobileForce 84.25-v2.30 GS RELEASED!!!	Fenuxx	NBF MobileForce Drivers	32	03-31-2006 04:00 PM
XTreme-G MobileForce 81.97-v2.25 and 82.65-v2.25 RELEASED!!!	Fenuxx	NBF MobileForce Drivers	29	02-20-2006 01:21 PM
XTreme-G MobileForce 81.98-v2.25 RELEASED!!!	Fenuxx	Notebook Forums - General	5	12-27-2005 02:22 PM