Use 790GTXUO.ROM It'll work best

Can everyone post what drivers you're all using? I'm crashing with 93.81 MobileForce and I can't hit 600/800 anymore.

I am using XTreme-G MobileForce 92.77 G3 with the 790GSUOV.ROM at 575/775 (had it at 600/815 but backed it down for peace of mind).

Everything is running as it should, Thanks again to all who had a hand in this and the orig GSX bios.

Problem: I have the 92.77 Dell drivers from TweakRUs installed but I'm not getting the classic control panel at all so I can't change clock settings except in ATiTool. How the heck am I supposed to set the clock to apply settings at startup without the classic control panel?!

Right Click Desktop > NVIDIA Control Panel

When it opens the window:

3D Settings > Change Overclocking Configuration

Then click the 'My Own Custom Clock Frequencies'

Once you find the settings you want to keep, make sure you UNCHECK the 'Use these settings only until I restart'

Done and done!

Hi,

I got an answer on this before, but the next question still remains;

Is it wise to use the 7900GTX bios from Juan on a 7900GS, or will it not bring any advantages?

Thanks!

Ah thanks Deceptikon... awesome... everything works great now. Many thanks to you guys... I may not post much but this forum and all your hard work and dedication has really helped out a lot.

Anyone else having issue with the newer drivers, e.g. 93.71 and 97.44? Seems like they won't allow me to overclock and crash when I test changes.

i don't mean to sound ungrateful/annoying but, i'm a geek and I'd kinda like to learn a little bit from this, so could u explain why exactly that one is better than the other one, or what that even means =) thanks

Sorry for the clueless question, but what does 'memory optimized' mean exactly?

haha that wud also be mny question

In regard to my previous post I made a blind boot disk just in case then flashed the lower voltage rom. I got it working with 0.92v for 2d and throttled 3d (which I increased to 300/400 from 200/300) and 1.05v for full 3d. Using this rom I was able to overclock to 575/752 with temps maxing at 87c. If anyone wants to try it download here:
v7900GS.rom

@stuckinasquare3
Memory optimized just means the memory timings are probably higher to allow higher clocks. This is most likely the same reason people can get such high clocks with the GTX bios. (similar to why 533 ram has cas4 latency while 667 ram has cas5 latency)

this memory optimized thingis too vague, the creator hast explained what he did, and timmis arent the problem bith are the same, i checked... so memeory optimized sound like BS to me.... i even though it was the delta offset setting, and that he confused it with memory, but it was not... so far nothing about it, but its unimportant cuz all we needed to know is that the bios can be modified and from there i bet those of us with expirience allready have made their own with this tewak

by they way, is sergiop the creator of this? that explains why he was so reserved in the other thread, but what i cant seem to explain, is why he was keeping this project in the darkness and why is it that it came like to the light like this,.. by pure "luck"....

NVM i see now that juanlu created this, but he has only 5 posts, so my question remains... was it luck...? or something else... he had to be observing around for a while other threads

ok take form the website If exprience buddys from the forums agree with me i will warn that THIS IS NOT A BUG!!!!!!!!!!
its supposed to be like this to save battery life, so noobs, dont use the bios as your permanent bios, as soons as you are able to make your own, plz make one that suits your batter life needs.