FAQ/Mod/Upgrade/Support Thread: GATEWAY P- ... ... Quote:Originally Posted by sam956I assumed you meant to typ ...

dave-p · 04-08-2008, 12:32 AM

Quote:

Originally Posted by sam956

I assumed you meant to type $600+

I found some for $440 plus s/h of $10
Would this work? would it be a big step up from the t9300 below?

http://cgi.ebay.com/Intel-T9500-Penr...QQcmdZViewItem

Will admit not all up on the laptop cores and such... but this seems like a fairly decent deal if it would work.

Newegg has the T9300 for $328

http://www.newegg.com/Product/Produc...tel-_-19111001

I am not 100 percent sure the T9500 will work, the specs say 478 pin, and the T9300 say Socket P.

Not sure its the same thing

Why0Why · 04-08-2008, 09:36 AM

Quote:

Originally Posted by dave-p

I am not 100 percent sure the T9500 will work, the specs say 478 pin, and the T9300 say Socket P.

Not sure its the same thing

Even if it does work, the extra money for .1 gHz is definitely not worth it, even if you have money to burn.

Spinitch · 04-08-2008, 08:05 PM

T9500 is also socket P so it should work w/o a problem.

dave-p · 04-08-2008, 08:53 PM

Here is my HD Tune Results for my Single 160 GB 7200 Drive

dave-p · 04-09-2008, 10:10 AM

My new WUXGA screen, and the T8300 are waiting for me when I get home in2 hours

Will try to see if I can find out more about the GPU tonight and post some pictures

sector7g · 04-11-2008, 08:05 PM

[quote=dave-p;2887822]

Quote:

Originally Posted by sector7g

Is there any problems with installing thermal paste to the northbridge?

I took off the heat pipe to install my t9300 and the pad on the northbridge ripped so now its not sitting clean over the chip.

or do I have to find another pad for the northbridge?[/QUOTE

I think you will need a pad, the spacing could be the problem, if there is too large a gap it will not cool properly

Well I applied paste to the northbridge, so far so good, I dont think there is a program that monitors the northbridge temp, but the gpu @50c and cpu @40c according to everest seem fine 2 me.

dave-p · 04-12-2008, 06:21 AM

Time will tell, but you can verify proper contact by removing the heat pipe and checking the coverage on the chipset, and the copper plate. It should be even.

If there are gaps present then you better find a thermal pad soon.

I have found typically there is a small gap in these setups for the North/South bridge thus the Pads

dave-p · 04-12-2008, 06:24 AM

So anyone try OC the GPU yet,

Spinitch · 04-12-2008, 08:14 PM

I know some have at NBR but I personally haven't.

dave-p · 04-14-2008, 08:14 PM

I now have XP running including Sound on the laptop

qhn · 04-15-2008, 02:38 AM

Quote:

Originally Posted by dave-p

I now have XP running including Sound on the laptop

cool ...
u might sharing migration instructions and all the necessary drivers links with other forum users? much appreciate

cheers ...

zeeter · 04-15-2008, 08:49 PM

dave, what new screen did you get and where did you order from?

dave-p · 04-16-2008, 07:21 AM

Quote:

Originally Posted by qhn

cool ...
u might sharing migration instructions and all the necessary drivers links with other forum users? much appreciate

cheers ...

Here is the link with all the instructions and files

http://neonpulse.net/2008/03/06/wind...x/#comment-271

dave-p · 04-16-2008, 07:27 AM

Quote:

Originally Posted by zeeter

dave, what new screen did you get and where did you order from?

I got a Phillps/LG screen from a E1705 series laptop. I had to modify the screen some what, in that the inverter bracket on the bottom was tacked into place.

I will post some pictures later today as I have to edit them first.

Seems just about any WUXGA screen will work on thiese laptops.

I know the samsung, screens work.

The screen I have in my E17-5 was easier to install as the inverter bracket was screwed into the bottom and came off much easier.

crazytiki13 · 06-03-2008, 06:07 PM

Quote:

Originally Posted by Spinitch

T9500 is also socket P so it should work w/o a problem.

hey spinitch your upgrades impress me alot i was wondering if you could show me were you bought your lcd and the cost of your current proccessesor(lol) and the screen thanks

04-09-2008, 10:10 AM	#125
dave-p Loving my Alien :) Join Date: Feb 2006 Location: Ontario, Canada Posts: 12,209 Reviews: 2 Benchmarks: 7 Credits: 100,748	My new WUXGA screen, and the T8300 are waiting for me when I get home in2 hours Will try to see if I can find out more about the GPU tonight and post some pictures __________________ M17x, FX Red, QX9300, Sli GTX-280, 384 GB SSD, 17" WUXGA, 4 GB DDR3 1333 Mhz 3yr CC M6400, Q9000, FX3700, 8GB DDR3, RGB LED Display, HD, Blu Ray, 1530 WiFi 370 BT, Desktop Water Cooled I7 920, P6T, 12 GB DDR3, Raid 10, Dell 2707, Blu Ray, GTX 295 CO-OP Copper, Swiftech GTZ, Koolance RP 1000BK, My Dells Vostro 1500, Studio 15, M6300,M1710, E1705,3500,4000,4100,5100,5150,6000, 7000,7500,8000,8500,C410,C610,C810,Cpi,CPx. 6400,1501

04-12-2008, 06:21 AM	#127
dave-p Loving my Alien :) Join Date: Feb 2006 Location: Ontario, Canada Posts: 12,209 Reviews: 2 Benchmarks: 7 Credits: 100,748	Time will tell, but you can verify proper contact by removing the heat pipe and checking the coverage on the chipset, and the copper plate. It should be even. If there are gaps present then you better find a thermal pad soon. I have found typically there is a small gap in these setups for the North/South bridge thus the Pads __________________ M17x, FX Red, QX9300, Sli GTX-280, 384 GB SSD, 17" WUXGA, 4 GB DDR3 1333 Mhz 3yr CC M6400, Q9000, FX3700, 8GB DDR3, RGB LED Display, HD, Blu Ray, 1530 WiFi 370 BT, Desktop Water Cooled I7 920, P6T, 12 GB DDR3, Raid 10, Dell 2707, Blu Ray, GTX 295 CO-OP Copper, Swiftech GTZ, Koolance RP 1000BK, My Dells Vostro 1500, Studio 15, M6300,M1710, E1705,3500,4000,4100,5100,5150,6000, 7000,7500,8000,8500,C410,C610,C810,Cpi,CPx. 6400,1501

04-12-2008, 06:24 AM	#128
dave-p Loving my Alien :) Join Date: Feb 2006 Location: Ontario, Canada Posts: 12,209 Reviews: 2 Benchmarks: 7 Credits: 100,748	So anyone try OC the GPU yet, __________________ M17x, FX Red, QX9300, Sli GTX-280, 384 GB SSD, 17" WUXGA, 4 GB DDR3 1333 Mhz 3yr CC M6400, Q9000, FX3700, 8GB DDR3, RGB LED Display, HD, Blu Ray, 1530 WiFi 370 BT, Desktop Water Cooled I7 920, P6T, 12 GB DDR3, Raid 10, Dell 2707, Blu Ray, GTX 295 CO-OP Copper, Swiftech GTZ, Koolance RP 1000BK, My Dells Vostro 1500, Studio 15, M6300,M1710, E1705,3500,4000,4100,5100,5150,6000, 7000,7500,8000,8500,C410,C610,C810,Cpi,CPx. 6400,1501

04-14-2008, 08:14 PM	#130
dave-p Loving my Alien :) Join Date: Feb 2006 Location: Ontario, Canada Posts: 12,209 Reviews: 2 Benchmarks: 7 Credits: 100,748	I now have XP running including Sound on the laptop __________________ M17x, FX Red, QX9300, Sli GTX-280, 384 GB SSD, 17" WUXGA, 4 GB DDR3 1333 Mhz 3yr CC M6400, Q9000, FX3700, 8GB DDR3, RGB LED Display, HD, Blu Ray, 1530 WiFi 370 BT, Desktop Water Cooled I7 920, P6T, 12 GB DDR3, Raid 10, Dell 2707, Blu Ray, GTX 295 CO-OP Copper, Swiftech GTZ, Koolance RP 1000BK, My Dells Vostro 1500, Studio 15, M6300,M1710, E1705,3500,4000,4100,5100,5150,6000, 7000,7500,8000,8500,C410,C610,C810,Cpi,CPx. 6400,1501

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Notebooks For Sale

User Links

Latest Pricing

Top Posters

Todays Top Posters

Fastest Benchmarks

Latest Benchmarks

04-08-2008, 08:05 PM	#123
Spinitch Registered User Join Date: Apr 2005 Posts: 628 Credits: 1,510	T9500 is also socket P so it should work w/o a problem.

04-12-2008, 08:14 PM	#129
Spinitch Registered User Join Date: Apr 2005 Posts: 628 Credits: 1,510	I know some have at NBR but I personally haven't.

04-15-2008, 08:49 PM	#132
zeeter Registered User Join Date: Apr 2008 Posts: 3 Credits: 231	dave, what new screen did you get and where did you order from?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Unofficial Asus Z71V Support Thread	smilepak	Asus Notebooks	161	04-01-2009 01:21 PM
Downgrade 6831 to XP	motoxpress	Gateway Notebooks	2	11-26-2007 04:05 PM
Gateway support stinks - perhaps someone here can help	ACDC	Gateway Notebooks	5	01-15-2006 10:21 AM
Gateway Tech support	E Fergler	Gateway Notebooks	8	04-04-2005 11:02 PM
Another ZD8000 /HP Support thread...	mparr	HP, Compaq and Voodoo Notebooks	4	03-03-2005 11:00 AM