|
|
#1 |
|
need forceware for farcry2
for dell 7900 gs for xp and vista, for more perfomance in the game, any help??
|
|
|
|
|
|
|
|
#2 |
|
Registered User
Join Date: Aug 2007
Posts: 61
Credits: 1,001
![]() |
Get the 180.42 off lv2g.
|
|
|
|
|
|
#3 |
|
the 180.42 from lv2g dosen`t support the 7900 GS
|
|
|
|
|
|
|
#4 |
|
Then get the newer 180.43's that were just released from LV2G -- their INF adds support for the 7900GS, and is a quick bug fix of 180.42's. I've been using these since last night, and my Far Cry 2 frames have gone up ~3-5 fps over 177.92's.
I play on my fx-7811 at 1440x900 with everything on Very High, DX10, Vista x64, and using "showFps 1" in the console during actual gameplay I tend to get between 25-35 fps. The benchmark is retarded and isn't anywhere NEAR what I get in actual gameplay.
__________________
Miss Gaudy: Gateway P-7811fx - P9500@2.53GHz (AS5'ed and Undervolted) - 4GB DDR3 - 2x320GB 7200.3's - 9800M GTS@750/1900/1750 - NBF MobileForce Se7en 190.38 w/PhysX drivers - Vista Ultimate 64-bit w/SP2 - 3DMark06: 10,129, 3DMark Vantage: P4,988 Bloaty McBloatson (SOLD): XPS M1710 - T7600G@2.83GHz (AS5'ed and Undervolted) - 4GB DDR2 - 200GB 7200RPM HD - 7950GTX Go@587/1300 (AS5'ed) - MobileForce VS 175.16 Enhanced Drivers - Vista Ultimate 64-bit w/SP1 Old Un-Faithful (now gone): XPS Gen 2 - 2.13GHz P-M 770 (undervolted 1.1v@16x & 0.7v@6x) - 2GB DDR2 - 100GB 7200RPM HD - 7800GTX Go Upgd (440/1150 OC) - MobileForce 97.92 Drivers - XP Pro SP2 - 3DMark05: 7580, 3DMark06: 3928 M1710 ICC Calibration Profiles |
|
|
|
|
|
|
#5 |
|
I just cant play FC2 on my m1710 with 7900gs. Weird that i was somehow able to complete crysis(mix of low/med settings) but i just cant go on 10 minutes with this on even lowest settings. Dont know whats at fault here, the gfx card or the drivers. Tried all 178.13,178.24,180.42 and 180.43 from LV2Go.
Man i really like that 7811-fx but just dont have the money ![]()
__________________
Anand Bawa (a.k.a theGR8anand) ![]() XPS M1710 @ 2.0 Ghz 3GB Ram, 160GB HDD 7900GS rev.1 @ 425/507 with Juanlu flash mod. 7 Ultimate 32-bit Current Drivers: DOX 185.85 |
|
|
|
|
|
|
#6 |
|
Registered User
Join Date: Aug 2007
Posts: 61
Credits: 1,001
![]() |
How's the 180.43 for CS:S?
|
|
|
|
|
|
#7 | |
|
Quote:
No idea -- I don't have any Source games installed on my computer as of now.
__________________
Miss Gaudy: Gateway P-7811fx - P9500@2.53GHz (AS5'ed and Undervolted) - 4GB DDR3 - 2x320GB 7200.3's - 9800M GTS@750/1900/1750 - NBF MobileForce Se7en 190.38 w/PhysX drivers - Vista Ultimate 64-bit w/SP2 - 3DMark06: 10,129, 3DMark Vantage: P4,988 Bloaty McBloatson (SOLD): XPS M1710 - T7600G@2.83GHz (AS5'ed and Undervolted) - 4GB DDR2 - 200GB 7200RPM HD - 7950GTX Go@587/1300 (AS5'ed) - MobileForce VS 175.16 Enhanced Drivers - Vista Ultimate 64-bit w/SP1 Old Un-Faithful (now gone): XPS Gen 2 - 2.13GHz P-M 770 (undervolted 1.1v@16x & 0.7v@6x) - 2GB DDR2 - 100GB 7200RPM HD - 7800GTX Go Upgd (440/1150 OC) - MobileForce 97.92 Drivers - XP Pro SP2 - 3DMark05: 7580, 3DMark06: 3928 M1710 ICC Calibration Profiles |
||
|
|
|
|
|
#8 |
|
i can play farcry2 with the m6 mobileforce 163.75 with 30-35 frames but i need more performance with my 7900gs
i will test the 180.43. |
|
|
|
|
|
|
#9 |
|
You can??? 169.04 were the last drivers i could use the juanlu flash mod with and overclock high. now i am stuck with 425/507 only. cant go 575/575 like i used to before. So i dont know what to do, revert to 169.04 and overclock higher or stay with 178.24..
__________________
Anand Bawa (a.k.a theGR8anand) ![]() XPS M1710 @ 2.0 Ghz 3GB Ram, 160GB HDD 7900GS rev.1 @ 425/507 with Juanlu flash mod. 7 Ultimate 32-bit Current Drivers: DOX 185.85 |
|
|
|
|
|
|
#10 |
|
I had use use the bios flash, but i not overclock, i can send you a sreen shot if you dont belive, and i tested the 180,43, but i had had no more performance, max 35 frames
![]() |
|
|
|
|
|
|
#11 |
|
You have to flash back to the stock BIOS to overclock with the newer drivers.
__________________
Miss Gaudy: Gateway P-7811fx - P9500@2.53GHz (AS5'ed and Undervolted) - 4GB DDR3 - 2x320GB 7200.3's - 9800M GTS@750/1900/1750 - NBF MobileForce Se7en 190.38 w/PhysX drivers - Vista Ultimate 64-bit w/SP2 - 3DMark06: 10,129, 3DMark Vantage: P4,988 Bloaty McBloatson (SOLD): XPS M1710 - T7600G@2.83GHz (AS5'ed and Undervolted) - 4GB DDR2 - 200GB 7200RPM HD - 7950GTX Go@587/1300 (AS5'ed) - MobileForce VS 175.16 Enhanced Drivers - Vista Ultimate 64-bit w/SP1 Old Un-Faithful (now gone): XPS Gen 2 - 2.13GHz P-M 770 (undervolted 1.1v@16x & 0.7v@6x) - 2GB DDR2 - 100GB 7200RPM HD - 7800GTX Go Upgd (440/1150 OC) - MobileForce 97.92 Drivers - XP Pro SP2 - 3DMark05: 7580, 3DMark06: 3928 M1710 ICC Calibration Profiles |
|
|
|
|
|
|
#12 |
|
Ya i know. Thats why i am stuck with 425/507 compared to 575/575 i could get before
![]()
__________________
Anand Bawa (a.k.a theGR8anand) ![]() XPS M1710 @ 2.0 Ghz 3GB Ram, 160GB HDD 7900GS rev.1 @ 425/507 with Juanlu flash mod. 7 Ultimate 32-bit Current Drivers: DOX 185.85 |
|
|
|
|
|
|
#13 |
|
does 180.43 support sli? dual 7900gs
|
|
|
|
|
|
|
#14 |
|
yes, all new forceware support SLI, autodedect the SLI mode
|
|
|
|
|
|
|
#15 |
|
i cant get it to work i threw the moded inf into the 180.53 driver ad it doesnt download.. it says not compatible with my cards. i have an m9700. any ideas? i just want to enable sli in farcry2. one card with the nbf mobileforce drivers runs pretty well with all on medium and terrain fire physics and trees on high.
|
|
|
|
|
![]() |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Forceware | th33viln3ss | Desktops or Other Technology | 2 | 09-25-2006 05:03 AM |
| ForceWare 84.21 | PC Gaming Freak | Alienware General | 7 | 06-14-2006 07:44 AM |
| Farcry2 leaked video | john0025 | Alienware General | 48 | 04-25-2006 06:13 PM |
| AMD Forceware 6.66 | Razyl | Alienware General | 1 | 07-16-2005 03:07 PM |
| Forceware 76.10 | RaiderRod | Sager 9880 and 9860 Tech Support (Tech problems only) | 4 | 03-11-2005 10:14 AM |
All times are GMT -6. The time now is 10:00 AM.





|4Gb Ram 800mhz
|
2x 200GB HD 7200RPM Raid 0|Windows seven PRo 64 Bit
+ Win XP SP3 







Linear Mode




