|
|
#91 |
|
That's not what you want to do Nick
Go into the Doom3 Video settings and Enable V-sync. That will clear up the tearing |
|
|
|
|
|
|
|
#92 |
|
Newbie
Join Date: Feb 2005
Location: Umass Amherst
Posts: 73
Credits: -234
![]() |
why not that seems to be what everyone else did to make it go away?
__________________
Area-51m 7700 17" WideSXGA+ 1680 x 1050 P4 3.4GHz 1GB Dual Channel DDR2 NVIDIA GeForce 6800 Go with 256MB of DDR3 memory RAID 0 - 120GB (60GB x 2) 7200 RPM ATA100 - Hitachi 24x10x24 CD-RW / 8X DVD Combo |
|
|
|
|
|
#93 |
|
Registered User
Join Date: Aug 2004
Posts: 485
Credits: -195
![]() |
I'm currently running the setup in my sig. I can't pull the same FPS you guys can with what was supposed to be the better video card for doom 3. The best solid 30 fps I can pull is 800x600 on high detail, shadows and everything on but no AA of Vsync. What seems to be the problem? What do you think I should be pulling, if anyone has experience with systems similar to mine. I know my system just got sent back to depot because there is a problem with the ram, it seemed like it was only using 512 megs too me, do you think that would cause a major problem? Specifically, the ram port on the right hand side wasn't allowing the ram the function correctly, causing Blue screen errors.
__________________
Monkeyboy070 Cyborg Green Area51m notebook with pentium 4 3.0, 1024 ram, nvidia geforcefx 5700, and a 40 gig 7200 RPM hard drive.
Last edited by monkeyboy070; 03-09-2005 at 03:32 PM. |
|
|
|
|
|
#94 |
|
I dunno monkey...30fps with shadows and high details sounds right for your laptop. The 5700 isn't exactly a slammer for the D3 engine
|
|
|
|
|
|
|
#95 |
|
Registered User
Join Date: Aug 2004
Posts: 485
Credits: -195
![]() |
I'm hoping that I get the laptop back and it is stupidly fast because the other ram slot wasn't working right....DON'T KILL MY DREAMS CRAIG!
![]()
__________________
Monkeyboy070 Cyborg Green Area51m notebook with pentium 4 3.0, 1024 ram, nvidia geforcefx 5700, and a 40 gig 7200 RPM hard drive.
|
|
|
|
|
|
#96 |
|
Lolol
|
|
|
|
|
|
|
#97 |
|
This what I'm using for my config: anything need tuning?
// IvL/FblnaU4w6bO89mN9XIzJKwdEz1acOB3LQ6Vj2NWPrRjcMHDUWwpZuwRPWiGOq/1bEuq7PdVAjbiYcS4A unbindall bind "TAB" "_impulse19" bind "ENTER" "_button2" bind "ESCAPE" "togglemenu" bind "SPACE" "_moveUp" bind "/" "_impulse14" bind "0" "_impulse10" bind "1" "_impulse0" bind "2" "_impulse1" bind "3" "_impulse2" bind "4" "_impulse3" bind "5" "_impulse4" bind "6" "_impulse5" bind "7" "_impulse6" bind "8" "_impulse7" bind "9" "_impulse8" bind "[" "_impulse15" bind "]" "_impulse14" bind "a" "_moveleft" bind "c" "_movedown" bind "d" "_moveright" bind "f" "_impulse11" bind "q" "_impulse9" bind "r" "_impulse13" bind "t" "clientMessageMode" bind "y" "clientMessageMode 1" bind "z" "_back" bind "BACKSPACE" "clientDropWeapon" bind "PAUSE" "pause" bind "LEFTARROW" "_left" bind "RIGHTARROW" "_right" bind "ALT" "_strafe" bind "CTRL" "_attack" bind "SHIFT" "_speed" bind "DEL" "_lookdown" bind "PGDN" "_lookup" bind "END" "_impulse18" bind "F1" "_impulse28" bind "F2" "_impulse29" bind "F3" "_impulse17" bind "F5" "savegame quick" bind "F6" "_impulse20" bind "F7" "_impulse22" bind "F9" "loadgame quick" bind "F12" "screenshot" bind "MOUSE1" "_attack" bind "MOUSE2" "_forward" bind "MOUSE3" "_zoom" bind "MOUSE4" "_impulse13" bind "MWHEELDOWN" "_impulse14" bind "MWHEELUP" "_impulse15" seta radiant_entityMode "0" seta gui_mediumFontLimit "0.60" seta gui_smallFontLimit "0.30" seta net_socksPassword "" seta net_socksUsername "" seta net_socksPort "1080" seta net_socksServer "" seta net_socksEnabled "0" seta win_ypos "22" seta win_xpos "3" seta sys_lang "english" seta s_numberOfSpeakers "2" seta s_doorDistanceAdd "150" seta s_globalFraction "0.8" seta s_subFraction "0.75" seta s_playDefaultSound "1" seta s_volume_dB "0" seta s_meterTopTime "2000" seta s_reverse "0" seta s_spatializationDecay "2" seta s_maxSoundsPerShader "0" seta r_debugArrowStep "120" seta r_debugLineWidth "1" seta r_debugLineDepthTest "0" seta r_cgFragmentProfile "best" seta r_cgVertexProfile "best" seta r_forceLoadImages "0" seta r_shadows "1" seta r_skipBump "0" seta r_skipSpecular "0" seta r_skipNewAmbient "0" seta r_renderer "best" seta r_brightness "1.333333" seta r_gamma "1" seta r_swapInterval "1" seta r_useIndexBuffers "0" seta r_customHeight "486" seta r_customWidth "720" seta r_fullscreen "1" seta r_mode "8" seta r_multiSamples "4" seta image_downSizeLimit "256" seta image_ignoreHighQuality "0" seta image_downSizeBumpLimit "256" seta image_downSizeSpecularLimit "64" seta image_downSizeBump "0" seta image_downSizeSpecular "0" seta image_useCache "1" seta image_cacheMegs "512" seta image_cacheMinK "20480" seta image_usePrecompressedTextures "0" seta image_useNormalCompression "0" seta image_useAllFormats "1" seta image_useCompression "0" seta image_roundDown "1" seta image_forceDownSize "0" seta image_downSize "0" seta image_lodbias "0" seta image_anisotropy "8" seta image_filter "GL_LINEAR_MIPMAP_LINEAR" seta gui_filter_gameType "0" seta gui_filter_players "0" seta gui_filter_password "0" seta net_master4 "" seta net_master3 "" seta net_master2 "" seta net_master1 "" seta net_clientMaxRate "16000" seta net_serverMaxClientRate "16000" seta m_strafeSmooth "4" seta m_smooth "5" seta m_strafeScale "6.25" seta m_yaw "0.022" seta m_pitch "0.022" seta sensitivity "4.222222" seta in_alwaysRun "0" seta in_freeLook "1" seta in_anglespeedkey "1.5" seta in_pitchspeed "140" seta in_yawspeed "140" seta gui_configServerRate "0" seta com_guid "" seta com_showFPS "0" seta com_purgeAll "0" seta com_machineSpec "3" seta g_decals "1" seta g_projectileLights "1" seta g_doubleVision "1" seta g_muzzleFlash "1" seta mod_validSkins "skins/characters/player/marine_mp;skins/characters/player/marine_mp_green;skins/characters/player/marine_mp_blue;skins/characters/player/marine_mp_red;skins/characters/player/marine_mp_yellow" seta g_mapCycle "mapcycle" seta g_voteFlags "0" seta g_gameReviewPause "10" seta g_countDown "10" seta g_password "" seta g_showBrass "1" seta g_showProjectilePct "0" seta g_showHud "1" seta g_showPlayerShadow "1" seta g_showcamerainfo "0" seta g_healthTakeLimit "25" seta g_healthTakeAmt "5" seta g_healthTakeTime "5" seta g_useDynamicProtection "1" seta g_armorProtectionMP "0.7" seta g_armorProtection "0.4" seta g_damageScale "1" seta g_nightmare "0" seta g_bloodEffects "1" seta ui_showGun "1" seta ui_autoReload "1" seta ui_autoSwitch "1" seta ui_team "Red" seta ui_skin "skins/characters/player/marine_mp" seta ui_name "mjdart" seta si_spectators "1" seta si_usePass "0" seta si_warmup "0" seta si_teamDamage "0" seta si_timeLimit "10" seta si_fragLimit "10" seta si_maxPlayers "4" seta si_map "game/mp/d3dm1" seta si_gameType "singleplayer" seta si_name "DOOM Server" seta g_spectatorChat "0"
__________________
Alienware Area-51m M5750 17" 1920X1200 Intel Core 2 Duo T7400 2.16GHz ATI X1800 Radeon (2) 80GB Seagate Momentus 7200 RPM Drives Alienware Area-51 5550 Extreme P4 550 H/T 3.4Ghz ASUS Nvidia Geforce 6800 Ultra DDR3 RAM 1.2GHz Seagate 80GB & Maxtor 120GB SATA Hard Drives Dell XPS m1710 17" Portable 1920X1200 Intel Core 2 Duo T7200 2.0GHz Nvidia Geforce 7900 GS 250GB Seagate 7200 rpm HD Intel® Wireless 4965AGN |
|
|
|
|
|
|
#98 |
|
Registered User
Join Date: Aug 2004
Posts: 485
Credits: -195
![]() |
you need to turn seta I_have_too_much_time_on_my_hands to "0"
__________________
Monkeyboy070 Cyborg Green Area51m notebook with pentium 4 3.0, 1024 ram, nvidia geforcefx 5700, and a 40 gig 7200 RPM hard drive.
|
|
|
|
|
|
#99 |
|
I have not upgraded from the original video driver on my 7700 yet and every time I try to enable V-sync in Doom 3 my system freezes as soon as I click on that particular item. All the other settings in the Doom 3 video setup work as advertised. I am going to get round to the driver update soon but my personal "seta I_have_too_much_time_on_my_hands " is currently configured at -1.
Has anyone else come across this problem or have a solution? Right now my problem with the video quality in Doom 3 is that when I move the mouse from side to side to look around the top 1/3 of the screen and the bottom 2/3 seem to be slightly out of sync - ie one section is moving faster than the other - again does anyone have any ideas apart from the driver upgrade? Hopefully this weekend I'll get around to installing one of the newer the drivers from laptopvideo2go. |
|
|
|
|
|
|
#100 |
|
Registered User
Join Date: Aug 2004
Posts: 485
Credits: -195
![]() |
No, but seriously, the reason I asked what mine should be at is because I notice alot of guys on here with similar load outs as mine getting 1024x768 on high with decent frame rates and stuff like that using a 9600 pro. They could be full of it, given, but I'd like to think they ain't that full of shit. So, I figured since the 5700 was supposed to be a little bit better, I should be able to atleast pull comparable fps and I can't. I was curious to hear what anyone else might say who uses a similar setup as mine.
__________________
Monkeyboy070 Cyborg Green Area51m notebook with pentium 4 3.0, 1024 ram, nvidia geforcefx 5700, and a 40 gig 7200 RPM hard drive.
|
|
|
|
![]() |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| The "Playing Doom3" Thread (Spoilers Inside!) | Craig | Alienware General | 71 | 10-18-2004 08:11 AM |
| The "Doom3 Tech Support" Thread | linix2004 | Alienware General | 38 | 10-09-2004 12:37 AM |
| 4780 Fan making horrible: "Clunk" "Klang" "Crutttthhhh" "crutttthh" noises :( | AlkalineX | Sager 4XXX Tech Support (Tech problems only) | 8 | 01-28-2004 06:32 PM |
All times are GMT -6. The time now is 12:26 AM.









Area-51m 7700





Linear Mode



